Lobster AN200 REBUILT RIVNUT INSTALLATION TOOL

$1,470.00

Specifications -
Model	AN-200
Riveting Capacity	For setting any thin-wall nut rivet - #6, #8, #10, 1/4", 5/16", 3/8" (M3 - M10) in all materials For setting any flanged head nut rivet - #6, #8, #10, 1/4" (M3 - M8) in all materials and 5/16" aluminum only
Traction Power	3520 lbs (1600kg) (15690N)
Stroke	0.24" (6.1mm)
Working Air Pressure	85-100 p.s.i. (6-7kg/cm2)
Air Consumption / Rivet Cycle	0.176 cu ft (5 liter/rivet)
Installation Cycle time	2.3 sec/cycle

L 9.65" (245mm)

H 11.42" (290 mm)

Wt 5.72 lbs (2.6kg)

Description: Rebuilt Lobster Model: AN-200

Lightweight spin-pull rivet nut setter.
Sets up to 3/8" aluminum and steel rivet nuts.
Rapid placement sequence.
One stage trigger--only one actuation of trigger spins rivet nut onto threaded mandrel, collapses rivet nut, then reverse spins itself out of completed setting.
Easy stroke adjustment dial.
In case of operator error, activation of unique reverse lever removes screw mandrel from rivet nut without damage or down time.
Wear-resistant surfaces extend tool life.
Rotary air joint.
Rugged aluminum die cast construction.